Hikayemiz

CLEANAAX^®  is a high-quality emulsion used for purging plastic injection (standard runner and hot runner), plastic extrusion, plastic film extrusion, and plastic blow molding machines.

CLEANAAX^® or CLEANAAX^®GF provides ease of use as it is mixed with the polymer you will feed into the machine.

After being mixed with the polymer and fed into the plastic machine, CLEANAAX^®  immediately penetrates into all surfaces that the barrel, screw, and plastic contact, absorbs all impurities stuck to these parts, and purges them from the machine.

It provides ease of use and stock thanks to its emulsion form and ability to be mixed with all known polymers. In other words, it is capable of purging after being mixed with the existing polymer used in the machine or with the polymer that will be newly added to the machine. A box of CLEANAAX^® (12 pieces x 1kg) 12 kilograms of product is very economical in terms of logistics, storage, and cost compared to its granular equivalent of 720 kilograms of cleaners. It reduces purging costs, especially in applications where high-cost sensitive raw materials are used since it can be used by mixing with PP raw materials instead of high-cost polymers. As PP raw materials can be used at temperatures up to 320 degrees, it is suitable for use as a purging agent in applications where all commodity plastics and engineering plastics and almost all high-performance plastics are used. In addition, another distinguishing feature of CLEANAAX^®  technology is that, unlike other granular purging products, it leaves absolutely no residue on the screws and barrels after cleaning.

CLEANAAX^®  doubles efficiency with the above-mentioned advantages of shortening purging time and reducing raw material and energy costs by fifty percent.

With its ammonia-free and solvent-free formulation, CLEANAAX^®GF not only responds quickly to color and raw material changes in all plastic machines, but can also be easily used in manual cleaning of disassembled machine parts and all metal parts.